So in this article, I am showing you how you can Create Bootable USB (Pendrive) for windows7, windows8, and windows10 very easily. I have shown all the steps to Create Bootable USB/Pendrive in this article. many people want to convert their Pendrive into bootable Pendrive. you can also use this method for WindowsXP. You can also watch the video is given below for better understanding. If you are facing any kind of issue while creating Bootable USB (Pendrive) then please comment below on this article. I will help you.
So, friends, there are many third-party software available on the internet to Create a Bootable USB. But you don’t need to download any third-party software for Create a Bootable USB. You just need to put some commands in CMD (Command Prompt) to do this job. And commands list is bellowed with screenshots:-
Commands For Create Bootable USB (Pendrive)
1. Please connect your USB drive to your computer and open Windows Run by combine press + R. And now type cmd in it and press Enter.
2. When you will press Enter, A new window will open then put a command on it diskpart and press Enter.
3. Now a new window will appear. So close first one and type a command in new one list disk then press Enter.
4. Your internal drive and all other drives will show those are connected with your computer. Drives will show by numbers. ie: (“0” “1” “2”). So now you have to choose your drive carefully by its number and memory size. Because you might be format your main internal drive. In my case, my drive is disk 1. So for choose a drive to create it bootable, type command select disk 1 and press Enter.
Note: Select Disk by it its number and memory ie: select disk 0, select disk 1. I have raised command select disk 1 because in my case my USB was showing disk 1.
5. Ok! now raise a command clean for clean your drive, Because we don’t want any virus or defected file in our USB drive. So type command clean and press Enter.
6. Let’s make your drive primary partition by raise command, create partition primary and press Enter.
7. Great! now your drive is primary partition. now raise command active to active partition and press Enter.
8. Well done! Now you have to select your partition by raise command select partition 1 and press Enter.
9. Superb! Now we will format our drive to make it bootable. So put command format fs=ntfs quick and press Enter.
10. All CMD commands are done now. so put command exit for exit from CMD.
So your USB is now Converted to Bootable USB. Now just Copy all windows files of any type of Windows from Windows DVD or Windows Image File. In my case, I have copied Windows Files from Windows DVD. And Paste those files to your Bootable USB. Now eject your drive from your computer and connect again. Enjoy your day.
For reading more exciting articles please visit the Homepage.
Thanks For Spend Your Time.